Clean equipment is vital to the pharmaceutical industry due to potential cross contamination between
product runs of various drugs.
Total Organic Carbon (TOC) analysis is a widely accepted way to analyze for residual pharmaceutical components.
WOT-100 TOC analyzer adopts the UV light-activated persulfate oxidation method.
TOC content is determined by first removing inorganic carbon (IC) from the sample through the addition of
phosphoric acid. The organic carbon is oxidized to carbon dioxide (CO2) using UV oxidation with
sodium persulfate. The CO2 produced is then swept to the non-dispersive infrared detector (NDIR) and
measured.
Based on above steps, we can get the TC and TIC, thus the TC - TIC= TOC.
UV light-activated persulfate oxidation method.
Equipped with eight-way rotary valve for automatic acid intaking, oxidant intaking, sample intaking ,purge and waste discharge.
Poweful software compliance with the requirements of 21CFR Part 11, audit trail, CSV(Computerized System Validation).
Remove halide and bicarbonate interference;
Low cost, main consumables are Phosphoric acid solution and Sodium persulfate solution;
Wide detemination range.
Easy to calibration, support the one point and multi-point calibration.
Built-in aeration tank, when testing NPOC, a series of processes such as aeration, acid addition and sample injection are completed by the instrument automatically.
Power supply: (220±10%)VAC 50/60Hz
Power consumption: 300W
Indication error: ±5%
Repeatability: RSD≤3%
Determination Range:(0-100.000)mg/L
Analysis time: 4 min.
Required sample temperature:(1-95)℃
Ambient temperature:(10-40)℃
Noise:≤55dB(A)
Dimensions: 55cm×50cm×53cm
Net Weight: 35Kgs
Cleaning validation in pharmaceutical industry
Technical specifications are subject to change without notice. Copyright reserved by Tailin.